More Surface Area, Better Flow, Reduced Inlet Temperature!
Compressed air is heated air—and when you mix high boost pressure with an aggressive fuel curve, the result can be inlet temperatures as high as 500 degrees F. That’s why BD developed the new Cool-It intercooler. With 57% more cooling surface area and a 33% thicker core, the Cool-It increases cooling efficiency to approximately 90%, compared to only 70% for the stock intercooler. That can mean a temperature reduction of up to 200 degrees Fahrenheit!. At the same time, 36% larger inlet and discharge tubes (3.125-inch vs. 2.625-inch) can handle up to 100 psi pounds per square inch of boost and over 1500 cfm, while holding pressure drop to less than 1 psi pounds per square inch.A direct, bolt-in replacement for the stock intercooler, the Cool-It is the best looking, best performing intercooler on the market. Hoses and heavy-duty spring-loaded T-bar clamps included in some kits.
Add to cart
Add to wish list